Generic

Metric Buna O-rings 59.3 x 5.7mm Minimum 2 pcs

Metric Buna 70 O-rings 59.3mm ID x 70.7mm OD x 5.7mm C/S 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels,...

Metric O-ring Cord Buna Nitrile 8mm Price per Foot

Metric O-ring Cord Stock 8mm 8mm Cross Section (Thickness) 70 Durometer Buna O-ring cord stock Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils, water and...

Metric O-ring Cord Red Silicone 10mm Price per Foot

Metric O-ring Cord Silicone 10mm 60 Durometer Red Silicone 10mm cord stock -103° to 550° temperature range High Temp, FDA, Food and Medical usage Price is $5.05 for 1...

Metric PTFE White O-rings 25.1 x 1.6mm Price for 1 pc

Metric PTFE O-rings 25.1mm ID x 28.3mm OD x 1.6mm C/S PTFE White hard plastic orings Good for Chemical and High Heat applications Temperature range -300°F to +500°F Price is $1.41...

Oil Shaft Seal 1-9/16 x 2-1/8 x 3/8" Double Lip Price for 1 pc

Inch - Oil Shaft Seals Double Lip NBR 1-9/16" ID x 2-1/8" OD x 3/8"Height 7 PSI Buna N Rubber Sealing Lip Seals in Grease and keeps surface clean Double lip

Piston U-Cup 50mm OD x 40mm ID x 6mm Seal Price for 1 pc

Metric Piston U-Cup Seal  Piston U-Cup Seal 50mm OD x 40mm ID x 6mm HT Lower Outer Lip Typically used on the Piston High Temp Urethane Seal -22° to +212°F Up to 5000...

Silicone O-rings 28 x 4mm Minimum 3 pcs

Silicone Rubber O-rings 28mm ID x 36mm OD x 4mm C/S 70 Durometer Silicone Rubber O-rings Silicone rubber has a wide temperature range which makes it useful in many applications...

Stainless Garter Springs for 105mm Shaft Minimum 1 pc

Stainless Garter Springs  Fits 105mm shaft or Inside Diameter of oil seal 105mm ID x 2.5mm coil diameter 316 Stainless Steel material Used on Buna NBR oil seals for corrosive environments Price...

X Rings Size 024 Minimum 5 pcs

X Rings Size#024 - 1-1/8 ID x  1-1/4 OD x  1/16 CS Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants,...

Buna O-rings # 106-90D Minimum 50 pcs

Buna 90 O-rings Size#106B90= 3/16 ID x 3/8 OD x 3/32 CS Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants, hydraulic...

EPDM 70 O-rings FDA/NSF Size 106 Minimum 25 pcs

EPDM 70 Durometer O-rings Size#106E=  3/16 ID x 3/8 OD x 3/32 CS Ethylene Propylene Rubber stays flexible in low temperature environments Not compatible with petroleum based...

FKM 90 Black Orings Size 106 Minimum 20 pcs

FKM Heat Resistant  O-rings Size #106 = 3/16 ID x 3/8 OD x 3/32 CS 90 Durometer Rubber FKM O-rings  A general purpose FKM (Fluorocarbon Elastomer) compound suitable for...