Generic

EPDM 70 O-rings FDA/NSF Size 028 Minimum 10 pcs

EPDM 70 Durometer O-rings Size#028E= 1-3/8 ID x 1-1/2 OD X 1/16 CS Ethylene Propylene Rubber stays flexible in low temperature environments Not compatible with petroleum based...

FKM 90 Black Orings Size 028 Minimum 10 pcs

FKM Heat Resistant Orings Size #028 = 1-3/8 ID x 1-1/2 OD x 1/16 CS 90 Durometer Rubber FKM Orings  A general purpose FKM (Fluorocarbon Elastomer) compound suitable for...

FKM O-ring 2.84 x 2.62mm Minimum 25 pcs

FKM Heat Resistant O-rings 2.84mm ID x 8.08mm OD x 2.62mm C/S 75 Durometer Rubber FKM O-rings A general purpose FKM (Fluorocarbon Elastomer) compound suitable for applications requiring...

Metric Buna O-rings 12 x 1mm Minimum 25 pcs

Metric Buna 70 O-rings 12mm ID x 14mm OD x 1.0mm C/S 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels, water...

Metric Buna O-rings 2.5 x 1.8mm Minimum 25 pcs

Metric Buna 70 O-rings 2.5mm ID x 6.1mm OD x 1.8mm C/S 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels,...

Metric Buna O-rings 2.8 x 1.6mm Minimum 25 pcs

Metric Buna 70 O-rings 2.8mm ID x 6mm OD x 1.6mm 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels, water and...

Metric Buna O-rings 2.8 x 1.8mm Minimum 25 pcs

Metric Buna 70 O-rings 2.8mm ID x 6.4mm OD x 1.8mm C/S 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels,...

Metric PTFE White O-rings 15 x 1mm Minimum 2 pcs

Metric PTFE O-rings 15mm ID x 17mm OD x 1mm C/S PTFE White hard plastic orings Good for Chemical and High Heat applications Temperature range -300°F to +500°F Price is $1.00 each

Stainless Garter Springs for 28mm Shaft Minimum 2 pcs

Stainless Garter Springs  Fits 28mm shaft or Inside Diameter of oil seal 28mm ID x 1.8mm coil diameter 316 Stainless Steel material Used on Buna NBR oil seals for corrosive environments Price...

Buna O-rings # 029-90D Minimum 25 pcs

Buna 90 O-rings Size#029B90= 1-1/2 ID x 1-5/8 OD x 1/16 CS Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants,...

EPDM 70 O-rings FDA/NSF Size 029 Minimum 10 pcs

EPDM 70 Durometer O-rings Size#029E=1-1/2 ID x 1-5/8 OD x 1/16 CS Ethylene Propylene Rubber stays flexible in low temperature environments Not compatible with petroleum based fluids...

FKM 90 Black Orings Size 029 Minimum 10 pcs

FKM Heat Resistant Orings Size #029 = 1-1/2 ID x 1-5/8 OD x 1/16 CS 90 Durometer Rubber FKM Orings  A general purpose FKM (Fluorocarbon Elastomer) compound suitable for...