Generic

Metric PTFE White O-rings 5 x 1mm Minimum 2 pcs

Metric PTFE O-rings 5mm ID x 7mm OD x 1mm C/S PTFE White hard plastic orings Good for Chemical and High Heat applications Temperature range -300°F to +500°F Price is $0.70 each...

Oil Shaft Seal 15/16 x 1-1/2 x 3/8" Double Lip Price for 1 pc

Inch - Oil Shaft Seals Double Lip NBR 15/16" ID x 1-1/2" OD x 3/8"Height 7 PSI Buna N Rubber Sealing Lip Seals in Grease and keeps surface clean Double lip

Stainless Garter Springs for 12mm Shaft Minimum 2 pcs

Stainless Garter Springs  Fits 12mm shaft or Inside Diameter of oil seal 12mm ID x 1.5mm coil diameter 316 Stainless Steel material Used on Buna NBR oil seals for corrosive environments Price...

Buna O-rings # 013-90D Minimum 50 pcs

Buna 90 O-rings Size#013B90= 7/16 ID x 9/16 OD x 1/16 CS Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants,...

EPDM 70 O-rings FDA/NSF Size 013 Minimum 25 pcs

EPDM 70 Durometer Orings Size#013 = 7/16 ID x 9/16 OD x 1/16 CS Ethylene Propylene Rubber stays flexible in low temperature environments Not compatible with petroleum based fluids...

FKM 90 Black Orings Size 013 Minimum 25 pcs

FKM Heat Resistant Orings Size #013 = 7/16 ID x 9/16 OD x 1/16 CS 90 Durometer Rubber FKM Orings  A general purpose FKM (Fluorocarbon Elastomer) compound suitable for applications...

FKM 90 Brown Orings Size 013 Minimum 25 pcs

FKM Heat Resistant Orings Size #013 = 7/16 ID x 9/16 OD x 1/16 CS 90 Durometer Rubber FKM Orings  A general purpose FKM (Fluorocarbon Elastomer) compound suitable for applications...

Metric Buna O-rings 4.5 x 1mm Minimum 25 pcs

Metric Buna 70 O-rings 4.5mm ID x 6.5mm OD x 1mm C/S 70 Durometer Rubber Buna O-rings Standard Nitrile is also known as Buna-N. Excellent resistance to petroleum-based oils and fuels, water...

Metric PTFE White O-rings 6 x 1mm Minimum 2 pcs

Metric PTFE O-rings 6mm ID x 8mm OD x 1mm C/S PTFE White hard plastic orings Good for Chemical and High Heat applications Temperature range -300°F to +500°F Price is $0.77 each...

Stainless Garter Springs for 13mm Shaft Minimum 2 pcs

Stainless Garter Springs  Fits 13mm shaft or Inside Diameter of oil seal 13mm ID x 1.5mm coil diameter 316 Stainless Steel material Used on Buna NBR oil seals for corrosive environments Price...

Buna O-rings # 014-90D Minimum 50 pcs

Buna 90 O-rings Size#014B90= 1/2 ID x 5/8 OD x 1/16 CS Buna Nitrile rubber is considered the standard for most general applications. Excellent resistance to petroleum based lubricants, hydraulic...

EPDM 70 O-rings FDA/NSF Size 014 Minimum 25 pcs

EPDM 70 Durometer Orings Size#014 = 1/2 ID x 5/8 OD x 1/16 CS Ethylene Propylene Rubber stays flexible in low temperature environments Not compatible with petroleum based fluids...